Skip to content

Home / Machines / Tumble Belt Shot Blasting Machine for Fasteners and Small Hardware

Tumble Belt Shot Blasting Machine for Fasteners and Small Hardware

Rubber-belt tumble shot blasting machine that cleans bolts, nuts, washers and stamped hardware in gentle batches, removing heat-treatment scale, rust and burrs while protecting threads before plating, painting or passivation.

Read product details
Tumble Belt Shot Blasting Machine for Fasteners and Small Hardware

Product description

Why Fasteners Need Gentle Batch Cleaning

Bolts, nuts, washers and stamped hardware leave forming and heat treatment covered in scale, oil film and fine burrs. Unlike large castings, these parts are small, numerous and easily damaged: an aggressive blast stream can round edges, disturb threads or leave parts nested together with untouched surfaces. A rubber-belt tumble machine is designed around that constraint. Parts turn gently inside a sealed chamber while a centrifugal wheel throws media across the moving bed, exposing every side of a fastener without hard-on-hard impact.

Design Logic of the Tumble Belt Layout

  • Cushioned rubber belt — The endless belt carries parts through the blast zone at a controlled speed, protecting threads and plated edges while turning recesses toward the media stream.
  • Centrifugal blast wheel — Media is accelerated mechanically instead of by compressed air, delivering consistent cleaning energy across the whole batch.
  • Separation and recirculation — An air separator strips dust and broken media before clean shot returns to the wheel, keeping the blast stream uniform.
  • Automatic loading and discharge — A skip loader feeds the chamber and reverses the belt to tip finished parts into a bin, limiting operator contact with dust.

Results and Application Boundaries

The process removes heat-treatment scale, light rust, oil residue and stamping burrs, leaving a uniform matte surface that helps plating, painting or passivation adhere. Because parts are handled as a batch, the machine suits job lots of mixed fasteners and small hardware rather than continuous strip or coil. Thread geometry and dimensional tolerance are preserved; this is surface preparation, not precision deburring or polishing.

Defining the Right Configuration

Belt size, chamber volume, wheel power and media selection are set after reviewing real parts. Send sample fasteners with material, batch weight and the required surface condition so the configuration can be matched to your workload. Throughput, cleaning grade and cycle time are confirmed after evaluation rather than quoted up front.

DEFINE THE CONFIGURATION.

ParameterValue
WorkpieceFasteners, bolts, nuts and small stamped hardware (samples reviewed first)
HandlingBatch tumble on a cushioned rubber belt with automatic loading
Surface removalHeat-treatment scale, light rust, oil residue and stamping burrs
Part protectionGentle tumbling to preserve threads and edges
ControlPLC cycle with adjustable tumble time and blast intensity
ConfigurationBelt size, wheel power and media set after sample evaluation

BRING US YOUR WORKPIECE.

Share a photo or drawing, material, maximum dimensions and expected output. These details help us review a suitable configuration.

Send project requirements

Related articles

Industry Applications

Match workpiece handling, blasting configuration and production flow to your application.

Explore industry applications