
Q69
Roller Conveyor
Steel plates, profiles and fabricated structures
Explore machineHome / Machines / Roller Conveyor Shot Blasting Machine for Aluminum Profiles
Continuous roller-conveyor blast line that removes oxide film and prepares aluminum extrusion profiles for powder coating and anodizing without changing dimensions.
Read product details
Aluminum extrusions arrive with a thin oxide layer, extrusion lubricants and handling marks that block coating adhesion. Unlike steel, aluminum is soft and non-ferrous, so the line must strip the surface without embedding iron or changing profile geometry. A standard steel-grade setup would leave embedded ferrous particles that later trigger filiform corrosion under the coating.
The roller conveyor carries full-length profiles through the blast chamber on edge-supported carriers, so long and thin-walled sections stay straight. Turbines are tuned to a lower, controlled blast intensity than a steel line, and the media circuit is dedicated to a non-ferrous abrasive (typically conditioned aluminium oxide or stainless-cut media) to keep the surface iron-free.
Best for window, door, curtain-wall and frame profiles in architectural and transport supply. Final blast parameters, abrasive grade and conveyor speed are set against your actual profile section, wall thickness and finish target — confirm these with our engineering review before specification.
| Parameter | Value |
|---|---|
| Workpiece | Aluminum extrusion profiles, sections and frames |
| Section size | Profile cross-section and wall thickness confirmed against a sample |
| Surface goal | Oxide film and lubricant removal for coating or anodizing |
| Abrasive | Non-ferrous media grade selected during engineering review |
| Throughput | Conveyor speed and batch size set to your production plan |
| Layout | Line length and inlet/outlet height confirmed to site |
Share a photo or drawing, material, maximum dimensions and expected output. These details help us review a suitable configuration.
Send project requirements
Q69
Steel plates, profiles and fabricated structures
Explore machine
QWD800
Parts carried through a continuous blasting process
Explore machine
Continuous flow
A continuous through-type shot blasting line cleans structural sections, tubes and plates while they keep moving. This page explains how blast wheel placement, media recycling and dust routing are configured around the workpiece cross-section.
Explore machine
Continuous flow
An abrasive recovery system for continuous roller conveyor shot blasting lines closes the loop between the blast chamber and the media supply, so spent abrasive and workpiece debris are separated before the media returns to the wheels. Recovery quality determines consumable cost, wheel maintenance intervals and how consistently the line holds a given surface standard.
Explore machineMatch workpiece handling, blasting configuration and production flow to your application.